§ 15.33.180. Industrial district signs.
In addition to the exempt signs in Section 15.33.080 and temporary signs in Section 15.33.090, the following types of signs are permitted in industrial districts, subject to the following limitations. In case of conflicts between these conditions, the most restrictive condition shall apply:
(1)
Permitted sign types as limited below:
(A)
Detached.
(i)
Ground and monument signs;
(ii)
Pole signs;
(iii)
Center signs in lieu of pole sign;
(iv)
On-premise directionals.
(B)
Attached.
(i)
Wall, awning or canopy signs;
(ii)
Below peak roof signs;
(iii)
Projecting signs.
(2)
Total permitted sign area is limited by the following conditions. In case of conflicts between these conditions, the most restrictive condition will apply.
District Maximum Permitted Area P-I* 1.0 × street frontage I-1 1.0 × street frontage I-2 1.0 × street frontage I-3 1.0 × street frontage (3)
Design Regulations for Detached Signage. If the property lies within the West Broadway design corridor as defined in Section 15.33.130 or within seven hundred (700) feet of interstate right-of-way as defined in Section 15.33.140, additional regulations apply.
(A)
Ground or monument signs, maximum of one per premise, exclusive of directional signs, subject to the limitations in Section 15.33.100.
District Maximum Size Maximum Height Maximum Number P-I* 1.0 × street frontage 10 feet 1 per premise I-1 1.0 × street frontage 10 feet 1 per premise I-2 1.0 × street frontage 10 feet 1 per premise I-3 1.0 × street frontage 10 feet 1 per premise * Unless modified by an approved development plan.
(B)
Pole signs, maximum of one per premise and subject to the limitations in Section 15.33.100. Pole signs are not permitted within the West Broadway design corridor as defined in Section 15.33.130.
(C)
Center sign in lieu of a pole sign, maximum of one per premise.
District Maximum Size Maximum Height Maximum Number P-I* 1.0 × street frontage 35 feet 1 per premise I-1 1.0 × street frontage 35 feet 1 per premise I-2 1.0 × street frontage 35 feet 1 per premise I-3 1.0 × street frontage 35 feet 1 per premise Maximum height shall not exceed fifteen (15) feet within one hundred fifty (150) feet of a residential district.
(D)
On-premise directional signs shall not exceed the following in each industrial district:
District Maximum Size Maximum Height Maximum Number P-I* 8 square feet 8 feet 2 per entrance drive I-1 8 square feet 8 feet 2 per entrance drive I-2 8 square feet 8 feet 2 per entrance drive I-3 8 square feet 8 feet 2 per entrance drive * Subject to an approved development plan.
(E)
Attached wall, awning or canopy signs.
District Maximum Sign Area P-I* 1.5 square feet per lineal foot of the building to which it is attached I-1 1.5 square feet per lineal foot of the building to which it is attached I-2 1.5 square feet per lineal foot of the building to which it is attached I-3 1.5 square feet per lineal foot of the building to which it is attached * Unless modified by an approved development plan.
(Ord. 5920 § 2 (part), 2007).